Digital Vibration Meter with LCD, Gauge Tester Analyzer

This vibration meter is an essential tool for everyday machinery vibration monitoring. It accurately measures acceleration (peak), displacement (peak to peak), velocity, and revolution (RPM) with no room for guessing errors. The device is user-friendly, requiring no specialized knowledge of vibration analysis. The digitally displayed vibration levels provide a clear indication of the machine’s running condition. An external accelerometer and magnetic base are utilized to enhance frequency response and ensure consistent vibration readings. The frequency ranges cover broad detection capabilities, making it ideal for fast and precise measurements of speed in either cm/s or ft/s. The speed parameter is used for vibration degree measurements in compliance with ISO-2372, BS-4675, and VDI-2056. Additionally, the HOLD function allows for the determination of maximum values.

Usage & Applications

• Designed for easy on-site vibration measurement of rotating machinery
• Quality control and commissioning
• Predictive maintenance purposes
• Bearing condition monitoring
• Conditional examination of oscillations in machines and construction units
• Detects imbalances, misalignments, and other errors in rotary machines

Standardization

• CE marking ensures compliance with essential health and safety requirements set by European Directives
• Certified to ISO-2954 for periodic measurements to detect out-of-balance, misalignment, and other mechanical faults in rotating machines

Features

• CE marked and conforms to ISO-2954 standards
• Measures vibration in terms of displacement, velocity, acceleration, and high-frequency acceleration in both metric and imperial units
• Lightweight, compact design fits easily into a pocket
• Equipped with a high-quality accelerometer and magnetic base for accurate and repeatable measurements
• Wide frequency range of 10Hz to 10kHz in acceleration mode
• Quick and accurate analysis for checking the balance and alignment of rotating objects
• Bearing condition monitoring function
• AC output socket for headphones and recording (headphones not included)
• 4-digit 18mm LCD screen with clear, legible readings
• Auto power-off feature to conserve battery life
• Battery status notification and high resolution
• Durable ABS-plastic casing for long-lasting, maintenance-free operation
• Includes a FREE protective carrying case with contoured rubber compartments for optimum shock absorption

Specifications

• Standardization: CE & ISO-2954
• Parameters Measured: Velocity, Acceleration, Displacement, RPM, and Frequency
• Transducer: Piezoelectric accelerometer
• Measuring Range:
  • Speed: 0.1-400.00mm/s
  • Velocity: 0.000-16.00 inch/s
  • Acceleration: 0.01-400 m/s²
  • Acceleration: 0.1-200 m/s², 0.3-1312 ft/s²
  • Displacement/Offset: 0.001-4.00mm, 0.04-160.0mil
  • Turns: 60-99990 rpm
  • Revolution: 60-99990 R.P.M.
• Frequency Range for Measuring:
  • Velocity: 10Hz to 1kHz
  • Acceleration: 10Hz to 1kHz in 1 mode, 10Hz to 10kHz in 10 mode for bearing condition check
  • Displacement: 10Hz to 1kHz
• Accuracy: <5% +2 digits
• Resolution: 0.01 (mm/s²), 0.1 (mm/s²), 0.001 (mm), 1 (U/min)
• Output: AC output 2.0V peak full scale (load resistance: above 10k)
• Power Supply: 4 x 1.5V AAA (UM-4) batteries
• Power Off Modes: Manual off at any time, auto power off after 5 minutes of inactivity
• Operating Conditions: Temperature 0~40°C, humidity below 90% RH
• Dimensions: 124mm x 62mm x 30mm
• Weight: 181g