Landtek Vibration Meter with Piezoelectric Sensor (10Hz~10kHz)

This 3-channel Vibration Meter is specifically designed for measuring various mechanical vibrations. It is used to assess periodic motion, check imbalances, and detect deflections in moving machinery. This device provides crucial data for quality control, runtime monitoring, and equipment maintenance. Vibration is a reliable indicator of the mechanical health or condition of machinery or products.

Features

• Uses a piezoelectric acceleration transducer to convert vibration signals
• Displays three parameters (velocity, acceleration, and displacement) for three position measurements or one specified position
• Wide frequency range (10Hz~10kHz) in acceleration mode
• Designed for easy on-site vibration measurement of rotating machinery for quality control, commissioning, and predictive maintenance
• LCD digital display with backlight
• Lightweight and easy to use
• High-quality accelerometer for accurate and repeatable measurements
• Three accelerometers for three-channel vibration measurement
• Bearing condition monitoring function
• Manual or automatic power shut-off to conserve power
• MAX value hold function
• Low battery indication
• AC output socket for headphones and recording
• Compliant with ISO 2954, GB13823.3 for periodic measurements, detecting out-of-balance, misalignment, and other mechanical faults in rotating machines
• USB data output to connect with a PC (cable and software not included)
• Bluetooth data output option (adapter and software not included)

Specifications

• Display: 4-digit LCD with backlight
• Vibration Sensor: Piezoelectric accelerometer
• Measurement Channels: Any one channel of X, Y, Z, or all three channels of XYZ
• Measurement Range:
  • Displacement: 0.001~4.000mm Equivalent Peak-Peak; 0.04~160.0 mil
  • Acceleration: 0.1~400.0 m/s² Equivalent Peak; 0.3~1312 ft/s²; 0.0~40g
  • Velocity: 0.01~400.0 mm/s True RMS; 0.004~16.00 inch/s
• Frequency Range:
  • Displacement: 10Hz ~ 1kHz
  • Acceleration: 10Hz ~ 10kHz
  • Velocity: 10Hz ~ 1kHz
• Accuracy: ±(5%n+2) digits
• Metric/Imperial Conversion
• Analogue Output: AC output 0~2.0V peak full scale (load resistance: above 10k)
• PC Interface: RS232C (cable and software not included)
• Operating Conditions:
  • Temperature: 0~50°C
  • Humidity: below 95% RH
• Power Supply: 4 x 1.5V AAA (UM-4) Batteries
• Size: 140 x 73 x 35mm
• Weight: 415g (excluding batteries)